Guides - Specialist Services


All guides/tutorials are intended for educational purposes only.
If you follow any of the guides/tutorials, you do so at your own risk.
We accept no liability and/or responsibility for any damage or otherwise that may be caused to your vehicle/belongings/possessions.

We do not own any images or text unless it is explicitly states our ownership.


Diagnostic Guides


CIC Equipped Vehicles - Entering The Service Menu

When on the main (home) screen, do the following;

  • Push the controller forward for 10 seconds
  • Turn right three clicks
  • Turn left three clicks
  • Turn right one click
  • Turn left one click
  • Turn right one click
  • Push the controller down for one short push


If everything has been done correctly, the final step (pushing the controller in) won't do anything on the screen.
Go to settings, and then there will be a new entry towards the bottom of the list, called 'Service Menu'


Coding Guides


Removing EDC From E9x M3

VO Coding

  • Remove $233 from vehicle order
  • FA write your vehicle order to both your CAS and FRM
  • For CCC equipped cars: VO code CAPPL to factory defaults
  • For CIC equipped cars: VO code CIC to factory defaults
  • VO code KOMBI

Individual Line Coding

  • For CCC equipped cars: CAPPL: 'EDC' to 'nicht_aktiv'
  • For CIC equipped cars: CIC: 'EDC_CIC' to 'nicht_aktiv'
  • KOMBI: 'EDCK_ALIVE_ZAEHLER' to 'nicht_aktiv' and 'EDCK_ID_MONITOR' to ''nicht_aktiv''
 

Removing Bulb Warning/Checks For LED Bulbs on FEM based vehicles

This is only for vehicles equipped with a FEM (F20, F21, F22, F23, F30, F31, F32, F33 etc)

Daytime running bulbs (halogen)

FEM > 3061 > TFL_R_KALTUEBERWACHUNG: nicht_activ
FEM > 3061 > TFL_R_WARMUEBERWACHUNG: nicht_activ
FEM > 3061 > TFL_R_IS_LED: activ
FEM > 3061 > TFL_L_KALTUEBERWACHUNG: nicht_activ
FEM > 3061 > TFL_L_WARMUEBERWACHUNG: nicht_activ
FEM > 3061 > TFL_L_IS_LED: activ

Side light bulbs (halogen)

FEM > 3061 > POL_R_KALTUEBERWACHUNG: nicht_activ
FEM > 3061 > POL_R_WARMUEBERWACHUNG: nicht_activ
FEM > 3061 > POL_R_IS_LED: activ
FEM > 3061 > POL_L_KALTUEBERWACHUNG: nicht_activ
FEM > 3061 > POL_L_WARMUEBERWACHUNG: nicht_activ
FEM > 3061 > POL_L_IS_LED: activ

Front fog light bulbs (halogen)

FEM > 3061 > NSW_R_KALTUEBERWACHUNG: nicht_activ
FEM > 3061 > NSW_R_WARMUEBERWACHUNG: nicht_activ
FEM > 3061 > NSW_R_IS_LED: activ
FEM > 3061 > NSW_L_KALTUEBERWACHUNG: nicht_activ
FEM > 3061 > NSW_L_WARMUEBERWACHUNG: nicht_activ
FEM > 3061 > NSW_L_IS_LED: activ

Front indicator bulbs (halogen)

FEM > 3061 > FRA_V_R_KALTUEBERWACHUNG: nicht_activ
FEM > 3061 > FRA_V_R_WARMUEBERWACHUNG: nicht_activ
FEM > 3061 > FRA_V_R_IS_LED: activ
FEM > 3061 > FRA_V_L_KALTUEBERWACHUNG: nicht_activ
FEM > 3061 > FRA_V_L_WARMUEBERWACHUNG: nicht_activ
FEM > 3061 > FRA_V_L_IS_LED: activ

Side indicator bulbs (halogen)

FEM > 3061 > FRA_Z_R_KALTUEBERWACHUNG: nicht_activ
FEM > 3061 > FRA_Z_R_WARMUEBERWACHUNG: nicht_activ
FEM > 3061 > FRA_Z_R_IS_LED: activ
FEM > 3061 > FRA_Z_L_KALTUEBERWACHUNG: nicht_activ
FEM > 3061 > FRA_Z_L_WARMUEBERWACHUNG: nicht_activ
FEM > 3061 > FRA_Z_L_IS_LED: activ

Low/dipped beam (halogen)

FEM > 3061 > AL_R_KALTUEBERWACHUNG: nicht_activ
FEM > 3061 > AL_R_WARMUEBERWACHUNG: nicht_activ
FEM > 3061 > AL_R_IS_LED: activ
FEM > 3061 > AL_L_KALTUEBERWACHUNG: nicht_activ
FEM > 3061 > AL_L_WARMUEBERWACHUNG: nicht_activ
FEM > 3061 > AL_L_IS_LED: activ

High/full beam (halogen)

FEM > 3061 > FL_R_KALTUEBERWACHUNG: nicht_activ
FEM > 3061 > FL_R_WARMUEBERWACHUNG: nicht_activ
FEM > 3061 > FL_R_IS_LED: activ
FEM > 3061 > FL_L_KALTUEBERWACHUNG: nicht_activ
FEM > 3061 > FL_L_WARMUEBERWACHUNG: nicht_activ
FEM > 3061 > FL_L_IS_LED: activ

Adding cruise control into E84 X1

Hardware

  • Required - Compatible SZL module/slipring (cruise control with braking) complete with stalks
  • Optional - KOMBI module/high cluster equipped with cruise control with braking

Installation Process - SZL

  • Remove airbag
  • Remove steering wheel
  • Remove SZL
  • Install new SZL
  • Reinstall steering wheel
  • Reinstall airbag

Installation Process - KOMBI

  • Virginise KOMBI high
  • Install new KOMBI high

Coding

  • Add $544 to your vehicle order
  • FA write your update vehicle order to both your CAS and NFRM
  • VO code your DSC
  • VO code your KOMBI (if KOMBI high is fitted)

Notes

Cruise control with work with just the SZL installed. Cruise control will only be displayed on the KOMBI high, and on no other KOMBI variant. Virginising the KOMBI is required for two things; to have the correct VIN number and to remove the tamper dot, and to have the correct mileage showing. Virginising is a specialist procedure which requires an EEPROM reader/writer.

Coding Aux Input Into E60/E61

Hardware

  • Official auxiliary retrofit kit

Installation

  • Follow instructions supplied with retrofit kit

Coding

VO Coding

  • Add +NAUX to vehicle order
  • For CCC equipped cars: VO code CAPPL to factory defaults
  • For CCC equipped cars: VO code CAUDI to factory defaults

 

Individual Line Coding

  • For CCC equipped cars: CAPPL: 'AUX_CONFIG' to 'mounted'
  • For CCC equipped cars: CAUDI: 'INPUT_SCALING_SUB2' to 'wert_02'

Notes

Aux will always have a lower volume level compared to other audio sources such as 'Radio' or 'CD'.


Don't feel comfortable doing this yourself? We've got you covered!