Care Information - Refurbishment & Repair

You can use your car as normal after our service - the materials, components & processes we use within the headlight rebuild exceeds OEM specification to ensure long lasting performance without any compromises.

Guarantee/Warranty - Refurbishment & Repair

Products
1 year guarantee on all products/parts regardless of manufacturer or supplier with the exception of BMW which comes with 2 years. For any warranty claims on BMW supplied parts, the vehicle will need to go to our BMW dealer for initial diagnosis which is chargable. If the supplied part is shown to be at fault, this will be replaced by BMW. Not valid if the products show signs of tampering, mishandling, mis-powering, reverse engineering, disassembly, installation error (if not installed by us), or if the vehicle is involved in an accident. Warranty will be voided if the vehicle is not fitted up with the correct parts to match factory specification, i.e. missing/damaged wheel arch liners. The warranty is for the purchaser only, and not transferable to a future owner. 

Services
1 year guarantee on all of services/workmanship with the exception of F10/F11 Refurbishment & Repair which comes with 2 year guarantee. Not valid if the service show signs of tampering, mishandling, mis-powering, reverse engineering, disassembly, or if the vehicle is involved in an accident. Warranty will be voided if the vehicle is not fitted up with the correct parts to match factory specification, i.e. missing/damaged wheel arch liners. The warranty is for the purchaser only, and not transferable to a future owner. Cosmetic issues will only be covered by the guarantee for any concerns raised within 28 days. 

Fitting
When fitting is opted for, bumper fitment will be as the vehicle arrived (at a minimum) as long as all the bolts, screws, clips and clamps (fixings) are present and correct when the vehicles arrives. If you are missing or have any damaged fixings, the same fitment cannot be guaranteed. Once a vehicle has left our premises, we cannot guarantee the bumper fitment or alignment - any issues must be raised on vehicle handover. Excess fitting/parts charges may be applicable for non factory fit vehicles, specifically on vehicles that have either; been involved in an accident, have had a previous poor bumper fit, have incorrect fixings present or incorrectly/poor fitting of aftermarket parts. We can additionally supply and fit brand new OEM fixings if in stock, or if advised beforehand. Work undertaken & vehicles left on premises at the owners risk. Wheels must be rechecked and retorqued 50 miles after fitting (if they are removed during the fit). Locking wheel nuts must be supplied on the day for the fitting to be carried out. Any snapped wheel bolts due to bolts being previously over-tightened is on the onus of the owner to repair/remove/refit.

If fitting is not being carried out by ourselves. we recommend professional removal and installation of the headlights, and we are not liable for any damage incurred from self installation. 

Coding may be required for the headlights for all features to function correctly. Coding and associated fees are the responsibility of the buyer.

If we're fitting at our commercial premises, headlight fitting/removal is covered within the guarantee for any issues raised within 28 days, after this time period any remedial work undertaken will be subject to normal fitting charge.

For any fittings carried out by a third party, no refunds/partial refunds/contributions will be made for any warranty work that we undertake.

Fogging/Condensation
We reference OEM workshop material & guidelines for fogging and condensation which is:

Headlight fogging fault pattern

Certain weather conditions can lead to fogging on the inside of the headlight lens.This is not necessarily a fault that requires replacement of the headlight.

Top row (A): Permissible fogging. Headlight does not need to be replaced.
Bottom row (B): Impermissible fogging. Warranty claim to be raised.

Headlights are fogged over
Repair notice for assessing condensation in the headlamp

The images show the difference between mild and severe condensation in the headlamps of various vehicles.

• A headlamp with substantial condensation can be recognised by the formation of droplets on the inside of the headlamp unit
• The appearance of moisture immediately following cleaning in a car wash or after the vehicle is driven in heavy rain can point to severe condensation and possibly indicate a headlight that is not effectively sealed. Usually occurs only on one side
• The condensation phenomenon is promoted by damp, humid air that penetrates into the headlamp from the outside by entering through the ventilation system. This then evaporates in the headlamp while it is still warm, and when the unit cools it then precipitates to form condensed moisture of the inside of the headlamp lens
• This neither causes corrosion damage to the headlamp, nor does it exercise a negative impact on the intensity of the light that it emits.
  

1 Light fogging
2 Heavy fogging

We will only warranty headlights if they fall under heavy/permissible fogging. Anything that doesn't fall within the above constraints is not considered to be an issue, and won't be covered under our warranty. 

All workshop material used for reference only, and we do not own any images or text unless it explicitly states our ownership.

Terms & Conditions - Refurbishment & Repair

Your fitting date may be moved due to (but not limited to) the following reason(s): Act of God, weather, staff resource issues, or illness. If we are unable to fulfil your booking date, you will be given as much notice as possible and rebooked for our first opportunity. We are not liable or responsible for any fees, charges or losses you may experience due to your booking being moved.

We own all media taken by team members of the vehicle in for the service(s) completed.

No refunds/partial refunds/contributions will be made for any free services that have not been carried out, or partially carried out (for example coding).

By ordering any of our products and/or services, you understand and accept everything outlined.

Returns/Refunds - Refurbishment & Repair

Due to the bespoke nature and speciality of these products & services, we do not accept returns or issue refunds, but will repair any defective components as per our guarantee as this is a service carried out to your defective components.

The cost of the product and service is a combination of our time spent along with our products/stock that have been purchased in for your specified service. Cancellations are subject to a 25% non refundable fee.

This is in line with Government guidance on custom products & services. Our products & services will be documented and demonstrated where possible to ensure that we can show they are not faulty.